First build: follow these seven steps

Install the software and assign servo IDs before assembling the body. Each chapter includes instructions and completion checks; skip steps you have already completed.

  1. 01 · Check the kit and print the parts
    Check the packing list, tools and complete-kit V5 parts.

  2. 02 · Connect the board and find its IP
    Complete first-time setup and record the Linux login.

  3. 03 · Install and start XGO Duck AI
    Open the cockpit and motion control console.

  4. 04 · Set up and number the servos
    Configure and label all 15 servos, one at a time.

  5. 05 · Assemble the robot and wire audio/video
    Build the body, fit the head modules and check every connection.

  6. 06 · Calibrate and take the first steps
    Calibrate the IMU and joints, then check the standing pose.

  7. 07 · Bind, talk and verify the complete robot
    Bind an agent and check sound, images, ranging and motion.

Already assembled? Find the task you need